IN-SIGHT 2000 비전 센서

In-Sight 비전 시스템의 강력한 기능과 비전 센서의 단순성 및 경제성 결합

자료

In-Sight 2000 시리즈 비전 센서는 In-Sight 비전 시스템의 강력한 기능과 비전 센서의 편의성 및 경제성을 결합한 제품입니다. 오류 방지 애플리케이션 문제를 해결하는 데 적합한 비전 센서는 검증된 In-Sight 비전 툴과 간단한 설치, 현장에서 교체 가능한 조명 및 광학 장치를 갖춘 모듈식 설계 등이 통합되어 가치, 사용 편의성, 유연성 면에서 새로운 표준을 정립하였습니다.

• Powerful In-Sight vision tools
• Easy setup with EasyBuilder
• Field interchangeable lighting and optics
• Modular body design

모든 In-Sight 2000 시리즈 비전센서는 단계별 EasyBuilder 인터페이스와 합격/불합격 검사 기능을 통해 쉬운 애플리케이션 개발을 제공합니다. In-Sight 2000-130 모델은 확장된 비전 도구 범위를 지원합니다.

pattern, pixel count, brightness, contrast, and edge tools enable the In-Sight 2000 to perform advanced presence/absence, measurement, and counting applications. Using these tools, the In-Sight 2000 can inspect multiple targets within a single image, as well as perform multiple inspection types relying on different tools. Pattern, edge, and circle tools locate (or fixture) the part so other vision tools can use this as a reference to complete their inspections. 

Pattern tool verifies that the correct number of staple strips have been added to a carton.

Brightness tool confirms the presence of all 10 capsules by showing the greatest delta between pass/fail areas.

High contrast in the target area indicates the presence of a diode.

Multiple edge tools measure pixels to detect a clean edge on a drill burr.

Pixel count tool confirms the presence of 13 separate hole punches within one target by determining pixel value.

Color pixel count tool confirms the integrity of packaging by identifying pixel values of colors trained in the region of interest.

Communications
The Cognex Connect suite of built-in communication protocols interface directly with any PLC, robot, or HMI on your factory network, ensuring a seamless communications link to other factory devices.

간단한 EasyBuilder 설치
강력한 비전 툴과 In-Sight Explorer 소프트웨어 인터페이스부터 시작해서 사용 편이성은 In-Sight 2000 시리즈의 중추를 차지합니다. 이로써 간단하게 설치를 완료할 수 있을 뿐 아니라 다른 공장 자동화 장치와의 원활하고 안정적인 통신 링크를 보장할 수 있습니다.

현장 교체 가능한 조명, 필터 및 광학 장치를 갖춘 In-Sight 2000 시리즈는 최고의 유연성을 제공하며, 실제로 어떤 생산 라인 환경에든 손쉽게 조정하여 사용할 수 있습니다.

필요한 통합 조명 종류에 상관없이 In-Sight 2000에서 제공되는 확산 조명 기술을 통해 고가의 비용이 드는 외부 조명 없이 어디서든 뛰어난 비전 검사를 수행할 수 있습니다.

In-Sight 2000 series vision sensors deliver simple pass/fail results across a wide range of applications in multiple industries, including electronics, automotive, consumer products, and health and pharmaceuticals. Powerful vision tools deliver robust inspection results for parts in all shapes and sizes. 

Edge Tool:
The presence of a rubber gasket attached to a molded plastic part is verified before an automated final assembly step.

Pixel Count Tool:
The presence of a fiducial is used to verify that an integrated circuit has been soldered onto the PCB in the correct orientation.

Pixel Count Tool:
The dial on a thermostat is checked to confirm that it is in the correct position, which helps to ensure proper installation.

Brightness Tool:
A fuel filter assembly is inspected for the presence of an O-ring installed in the proper location before final packaging. 

Color Pixel Count Tool :
A wheel hub bearing is checked for the presence of quality control (QC) marks before moving to the next stage of assembly. The absence of the QC marks indicates that the hub bearing has not yet been inspected.

Pixel Count Tool:
A fuel bowl gasket is inspected to verify that all 13 through holes have been punched out. A missing hole will cause the part to fail. 

Edge Tool:
A bottle passes in front of the sensor, and both fill level and cap assembly are validated before the product is packaged. 

Color Pixel Count Tool:
A color pixel count tool verifies that the correct fruit snack flavor is present to ensure that it is packaged in the correct order. 

Edge Tool:
The distance between the two halves of an enclosure is measured to verify that the electrical plug has been assembled correctly. An open plug will cause a failure in the downstream packaging equipment. 

Pattern Tool:
A pattern counting tool is used in this example to inspect the carton and to verify that the correct number of staple strips have been added.

Pixel Count Tool:
A package of light bulbs is inspected to confirm that all 4 bulbs are present and that none of the bulbs are broken. 

Brightness:
A lotion bottle is checked to confirm that the pump dispenser is in the locked position before the bottle is packed into a carton. 

Color Pixel Tool:
A shampoo bottle is inspected to confirm that the cap and bottle colors match.

Brightness Tool:
A blister pack is inspected to verify that all the capsules are present after sealing.